New Asker Durometer rubber / plastic hardness tester Asker A
Description:
The Type A Durometer for general rubber (Normal hardness )
The mainstream product used world-wide for measuring various kinds of rubbers, and specified in the standards of JIS K 6253, ASTM D 2240, ISO 7619, DIN53505, etc.
The Pressure foot in contact with the specimen is 44mm in width and 18mm in depth, wide enough to ensure accurate measurement.
Another type of durometer with an 18mm diameter pressure foot is available. In addition, the Longer Pressure Foot Type (AL Type) is applicable for measurement of narrow or concave specimens .
Type A Durometer (ASKER A type), conforming to JIS K 6235 is the most popular type of durometer for measuring rubber hardness.
However, verification is recommended because a significant difference is estimated to be the largest when a durometer indicates measurement values from 10 to 90 points.
For hard specimens for which Type A Durometer readings indicate more than 90 points, measurements should be undertaken using the Type D Durometer (ASKER D type). However, for soft specimens with measurements of less than 20 points, the ASKER C type or Type E Durometer (ASKER E type) should be used. The most important consideration in using durometers is to select the correct type for purposes of measurement according to the specimen.
Packing List:
1 x Asker A Durometer
1 x Carry case
1 x Instruction Manual
Standard Factory Package
Shipping & Handling:
Shipping by DHL/EMS. It will take 3-7 days for delivery.
Item will be shipped within 1-2 working days after payment received. As fast as we can.
Please make sure the address is correct before you pay.
Import duties, taxes and charges are not included in the item price or shipping charges. Buyers are responsible for these charges
For any reason you are not satisfied with your purchase, please contact us by email to resolve any issues there before leaving feedback.
|